Commercial Building
Engineering Services

Complete REVIT MEP model covering all mechanical, electrical, and plumbing systems — enabling clash detection, quantity take-off, and coordinated construction drawings.

• Mechanical model — HVAC ducts, chilled water pipes, fan coil units
• Electrical model — cable trays, conduits, panels, lighting
• Plumbing model — domestic water, drainage, fire protection pipework
• Clash detection — multi-discipline interference checking
• Coordinated drawings — reflected ceiling plans, service corridor sections
• Material take-off (MTO) for procurement and tendering

Energy-efficient HVAC design for commercial offices, retail areas, food courts, multiplex cinemas, and mixed-use facilities.

• Chilled water system design — chiller, AHU, FCU, cooling tower
• VRF/VRV system design for smaller commercial buildings
• Precision cooling for IT rooms and server closets
• Heat load calculations — ASHRAE methodology
• ECBC compliance — minimum COP, IPLV, duct insulation
• Smoke extract and pressurisation systems

Complete electrical design from HT incoming supply to final outlet — complying with NBC 2016 and IE Rules.

• HT/LT substation design — transformer sizing, MV/LV switchgear
• Load flow analysis and maximum demand calculation (ETAP)
• Short circuit and protection coordination study
• Lighting design — lux levels, emergency lighting, façade lighting
• DG set sizing, ATS, and essential power distribution
• EV charging infrastructure design
• Lightning protection — IS 2309 / IEC 62305

NFPA 13 and NBC compliant fire protection for commercial buildings — sprinkler systems, hydrant networks, and fire detection.

• Wet pipe sprinkler system design — office, retail, basement, atrium areas
• Hydrant and hose reel network design
• Fire pump sizing and selection — NFPA 20
• Addressable fire detection system layout
• Hydraulic calculations and statutory approval submission
• Smoke management for atrium and mall areas