MEP Design, Piping Stress &
Process Simulation Consultancy
Specialist engineering design and consultancy headquartered in New Delhi, with offices in Navi Mumbai and Faridabad. Over two decades delivering simulation-driven, code-compliant engineering for data centres, Gigafactories, oil and gas facilities, hospitals, power plants, and industrial infrastructure across India and internationally.
About KVRM Engineering Services
KVRM Engineering Services is a specialist engineering design and consultancy firm headquartered in New Delhi, with offices in Navi Mumbai and Faridabad. We provide MEP system design, piping stress analysis (Caesar II), hydraulic and surge analysis (AFT Fathom, AFT Impulse, PIPENET, WaterGems), process simulation (Aspen HYSYS, Aspen Plus), static equipment design (HTRI heat exchangers, PVElite pressure vessels, API 650 storage tanks), power plant cycle analysis (Thermoflow GT PRO, STEAM PRO), fire protection engineering, energy management, and project management consultancy (PMC) — to clients across India and internationally.
Over two decades, KVRM has built a reputation for technically rigorous, simulation-driven engineering — delivering code-compliant designs for data centres, Gigafactories, hospitals, oil and gas facilities, refinery and petrochemical plants, pharmaceutical facilities, power generation projects, and commercial buildings. We are not a generalist consultancy. Every discipline we offer is backed by the industry-standard software for that discipline — and every deliverable is fully documented.
Based in New Delhi, Navi Mumbai, and Faridabad — serving clients across Delhi NCR, Mumbai, Pune, Hyderabad, Bangalore, Chennai, and internationally.
- Validated through calculation and simulation — never assumed to be correct
- Checked against ASME, API, TEMA, NFPA, NBC 2016, TIA-942, ISO 14644, IEC, and client standards
- Optimised for lifecycle performance, energy efficiency, and construction cost
- Engineered for operational safety and long-term reliability
- Delivered with complete documentation — calculation reports, model files, drawings, every project
Simulation-Driven. Multi-Discipline. Fully Documented.
We are built around deep technical specialisation across multiple engineering disciplines — each backed by industry-standard simulation software. No rule-of-thumb sizing. No black-box outputs.
Every design is validated through simulation:
Piping stress:
Caesar II
ASME B31.1
ASME B31.3
ASME B31.4
ASME B31.8
Hydraulic & surge analysis:
PIPENET
AFT Fathom
AFT Impulse
AFT Arrow
WaterGems
Bentley Hammer
PipeFlow Expert
Process simulation:
Aspen HYSYS
Aspen Plus
Power plant cycles:
Thermoflow GT PRO
STEAM PRO
THERMOFLEX
Static equipment:
HTRI Xchanger Suite
PVElite
COMPRESS
API 650
API 620
MEP & electrical:
REVIT
ETAP
HAP
SP3D
PDMS
AutoCAD Plant3D
Project management:
Primavera P6
MS Project
- ASME B31.1 / B31.3 / B31.4 / B31.8 — Piping
- ASME Section VIII Div 1 & 2 — Pressure Vessels
- API 650 / API 620 — Storage Tanks
- TEMA — Heat Exchangers
- NFPA 13 / 15 / 20 / 2001 / 855 — Fire
- NBC 2016 / IS Codes / IEC — Building
- TIA-942 — Data Centres
- ASHRAE TC 9.9 — Data Centre Thermal
- ISO 14644 — Clean & Dry Rooms
- EU GMP / FDA 21 CFR — Pharmaceutical
- ISO 50001 — Energy Management
- API 520 / 521 — Pressure Relief
- Piping Stress Analysis (Caesar II)
- Hydraulic & Surge Analysis
- Process Simulation (HYSYS, Aspen Plus)
- Power Plant Cycle Analysis (Thermoflow)
- Heat Exchanger Design (HTRI)
- Pressure Vessel Design (PVElite)
- Storage Tank Design (API 650)
- MEP Design & BIM (REVIT)
- Fire Protection (NFPA / NBC)
- Clean & Dry Room Design
- Energy Audits (BEE / ISO 50001)
- PMC — Owner’s Engineer
Commitment, Vision & Mission
How We Work
Five disciplined steps — from scope understanding to full documentation delivery. The same process applies whether the project is a data centre, a Gigafactory, an oil and gas plant, or a hospital.
Project scope, constraints, applicable codes, and site conditions — Gigafactory dry room at −40°C dew point, data centre Tier III, hospital OT, oil & gas process simulation, or refinery piping stress analysis.
Caesar II for piping stress, AFT Fathom or PIPENET for hydraulic networks, Aspen HYSYS or Aspen Plus for process simulation, HTRI for heat exchangers, REVIT for MEP, ETAP for electrical — real behaviour modelled before equipment is specified.
Every design checked against the applicable code. ASME B31.3 for process piping. ASME Section VIII for pressure vessels. API 650 for storage tanks. NFPA 855 for battery fire protection. TIA-942 for data centres. No assumptions.
PUE reduction in data centres, dry room energy recovery in Gigafactories, process debottlenecking for refineries, pipe routing changes that reduce stress loads, MEP layouts that eliminate coordination clashes.
Full documentation packages: calculation reports, simulation model files, drawings, specifications, design basis, IBR statutory documentation, and statutory submission packages — every discipline, every project.
Sectors We Serve
One engineering standard across 12+ sectors — from Gigafactories and data centres to hospitals, oil refineries, power plants, and residential towers.
▪ INDUSTRIAL & PROCESSWhere We Are Based
Three offices across India — serving clients across Delhi NCR, Mumbai, Pune, Hyderabad, Bangalore, Chennai, and internationally.
Adarsh Nagar, New Delhi — 110033
📞 +91 8447784536
✉ info@kvrm.in
Sector III, Navi Mumbai, Maharashtra — 410210
✉ services@kvrm.in
Serving clients across the
Delhi NCR industrial corridor.
✉ info@kvrm.in
Ready to Work With KVRM?
Gigafactory or hospital, data centre or refinery, power plant or residential tower — our engineering team responds within 24 hours.